Installation of WPC facade boards

WPC facade boards can be mounted on the facade both horizontally and vertically. If the boards are mounted vertically, it is recommended to leave a gap of 5 mm between them.

When assembling the boards horizontally, we recommend placing them so that the lower edge of the upper board is partially placed on the upper edge of the lower board so that the fixing screws of the lower board are covered.

We recommend use the metal profiles in the inner and outer corners, as well as at the joints.

The distance between the laths on which the WPC façade board ART-F-3D can be attached must not exceed 40 cm.

Do not pull the boards out of the pallet at one end, as scratches may occur.

The same tools that normally treat wood are used to lengthen, saw or drill boards.